Skip to content

AX1 Instructions

SURFACE PREP:
  1. Clean, decontaminate, dry the surface.
  2. Correct any surface marring, swirls, scratches.
  3. Remove polish oils and residue using ACC Ceramics' PrepPro (strong degreaser) Always Clean, Correct, Degrease. Do not skip.
APPLICATION:
  1. Use 10-15 drops of AX1 on applicator (add more as needed)
  2. Apply evenly to panel, working in cross hatching and/or circular motions. Ensure full even coverage.
  3. Allow coating to self-level for 1-3 minutes.
  4. Manually level coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless microfiber towel. Be sure not to leave any smudges or streaks
  6. Repeat steps 1-5 for each panel until each panel is ceramic coated.
  7. Check for high spots (they will appear darker with streaks) High spots can be reactivated with more coating and leveled with towel during first few hours of coating.
In Hot and Humid Climate: Work faster and in smaller sections. Replace applicator and towels as needed during the coating process.
For best results, apply in well ventilated, temperature-controlled environment. Keep surface dry for 24 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your vehicle.
DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT. ONLY FOR USE ON PAINTED SURFACES, CHROME, PPF AND HARD PLASTICS ONLY. DO NOT USE ON FLEXIBLE PLASTICS.
Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.
5+ year Professional Grade Ceramic Coating
Keep out of reach of children

Shopping Cart

Your cart is currently empty

Shop now