Skip to content

Ceramic Coating Directions

AX1 Ceramic Coating

SURFACE PREP:

  1. Clean, decontaminate, dry the surface.
  2. Correct any surface marring, swirls, scratches.
  3. Remove polish oils and residue using ACC Ceramics' PrepPro (strong degreaser).

Always Clean, Correct, Degrease. Do not skip.

APPLICATION:

  1. Use generous amount of AX1 on applicator
  2. Apply evenly to panel, working in cross hatching and/or
    circular motions. Ensure full even coverage.
  3. Allow coating to self-level for 1-3 minutes.
  4. Remove excess coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless
    microfiber towel. Be sure not to leave any smudges or streaks
  6. Repeat steps 1-5 for each panel until each panel is ceramic
    coated.
  7. Check for high spots (they will appear darker with streaks). High spots
    can be reactivated with more coating and leveled with towel during first few
    hours of coating.

In Hot and Humid Climate: Work faster and in smaller
sections.

Replace applicator and towels as needed during the coating process. For best results, apply in well ventilated, temperature-controlled environment. Keep surface dry for 24 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your vehicle.

DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT.

Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.

5+ year Professional Grade Ceramic Coating

Keep out of reach of children.

MX1 Ceramic Coating

SURFACE PREP:

  1. Clean, decontaminate, dry the surface.
  2. Correct any surface marring, swirls, scratches.
  3. Remove polish oils and residue using ACC Ceramics' PrepPro (strong degreaser).

Always Clean, Correct, Degrease. Do not skip.

APPLICATION:

  1. Use generous amount of MX1 on applicator
  2. Apply evenly to panel, working in cross hatching and/or
    circular motions. Ensure full even coverage.
  3. Allow coating to self-level for 1-3 minutes.
  4. Remove excess coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless microfiber towel. Be sure not to leave any smudges or streaks
  6. Repeat steps 1-5 for each panel until each panel is ceramic
    coated.
  7. Check for high spots (they will appear darker with streaks). High spots can be reactivated with more coating and leveled with towel during first few
    hours of coating.

In Hot and Humid Climate: Work faster and in smaller
sections.

Replace applicator and towels as needed during the coating process. For best results, apply in well ventilated, temperature-controlled environment. Keep surface dry for 24 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your Motorcycle.

DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT.

Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.

5+ year Professional Grade Ceramic Coating

Keep out of reach of children.

VX1 Ceramic Coating

SURFACE PREP:

  1. Clean, decontaminate, dry the surface.
  2. Correct any oxidation, surface marring, swirls, scratches.
  3. Remove polish oils and residue using ACC Ceramics' PrepPro (strong degreaser).

Always Clean, Correct, Degrease. Do not skip.

APPLICATION:

  1. Use generous amount of VX1 on applicator
  2. Apply evenly to panel, working in cross hatching and/or circular motions. Ensure full even coverage.
  3. Allow coating to self-level for 1-3 minutes.
  4. Remove excess coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless microfiber towel. Be sure not to leave any smudges or streaks
  6. Repeat steps 1-5 for each panel until each panel is ceramic coated.
  7. Check for high spots (they will appear darker with streaks). High spots can be reactivated with more coating and leveled with towel during first few
    hours of coating.

In Hot and Humid Climate: Work faster and in smaller
sections.

Replace applicator and towels as needed during the coating process. For best results, apply in well ventilated, temperature-controlled
environment. Keep surface dry for 24 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your vessel.

DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT.

Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.

Professional Grade Ceramic Coating

Keep out of reach of children.

RX1 Ceramic Coating

SURFACE PREP:

  1. Clean, decontaminate, dry the surface.
  2. Correct any surface marring, swirls, scratches.
  3. Remove polish oils and residue using PrepPro (strong degreaser).

Always Clean, Correct, Degrease. DO NOT SKIP.

APPLICATION:

  1. Use generous amount of RX1 on applicator
  2. Apply evenly to wheel. Ensure full even coverage. If wheel is intricate, divide wheel into smaller sections.
  3. Allow coating to self-level for 1-3 minutes.
  4. Manually level coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless microfiber towel. Be sure not to leave any smudges or streaks
  6. Repeat steps 1-5 for each panel until each wheel is ceramic coated.
  7. Check for high spots (they will appear darker with streaks). High spots can be reactivated with more coating and leveled
    with towel during first few hours of coating.

In Hot and Humid Climate: Work faster and in smaller
sections.

Replace applicator and towels as needed during the coating process. For best results, apply in well ventilated, temperature-controlled environment. Keep surface dry for 24 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your wheels.

DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT

Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.

2+ year Professional Grade Ceramic Coating

Keep out of reach of children.

MATTE Ceramic Coating

SURFACE PREP:

  1. Clean, decontaminate, dry the surface.
  2. Never polish matte paint, this will result in added gloss. Scratches and imperfections cannot be corrected on matte paint.
  3. Remove any oils and residue using ACC Ceramics' PrepPro (strong degreaser).

Always Clean & Degrease. Do not skip.

APPLICATION:

  1. Use generous amount of MATTE on applicator
  2. Apply evenly to panel, working in cross hatching and/or circular motions. Ensure full even coverage.
  3. Allow coating to self-level for 1-2 minutes.
  4. Remove excess coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless microfiber towel. Be sure not to leave any smudges or streaks
  6. Repeat steps 1-5 for each panel until each panel is ceramic coated.
  7. Check for high spots (they will appear darker with streaks) High spots can be reactivated with more coating and leveled with towel during first few hours of coating.

In Hot and Humid Climate: Work faster and in smaller
sections.

Replace applicator and towels as needed during the coating process. For best results, apply in well ventilated, temperature-controlled environment. Keep surface dry for 24 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your vehicle.

DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT.

Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.

5+ year Professional Grade Ceramic Coating

Keep out of reach of children.

GX1 Ceramic Coating

SURFACE PREP:

  1. Clean, decontaminate, dry the surface.
  2. Clay bar or polish the glass with an abrasive polish.
  3. Remove polish oils and residue using PrepPro (strong degreaser).

Always Clean, Correct, Degrease. DO NOT SKIP.

APPLICATION:

  1. Use generous amount of GX1 on applicator
  2. Apply evenly to glass, working in cross hatching and/or circular motions. Ensure full even coverage.
  3. Allow coating to self-level for several minutes.
  4. Manually level coating with dry, folded, edgeless microfiber towel.
  5. Wipe panel again with second dry, folded, edgeless microfiber towel. Be sure not to leave any smudges or streaks.
  6. Repeat steps 1-5 for each panel
    until each panel of glass is ceramic coated.
  7. Check for high spots (they will
    appear darker with streaks). High spots can be reactivated with more coating and leveled with towel during first few hours of coating.

Keep dry for 3 hours.

In Hot and Humid Climate: Work faster and in smaller
sections.

Replace applicator and towels as needed during the coating process. For best results, apply in well ventilated, temperature-controlled environment. Keep surface dry for 3 hours. Do not wash or rub for 7 days. The better care you take of your coating the longer it will take care of your glass.

DO NOT USE IN DIRECT SUNLIGHT OR EXTREME HEAT.

Coatings are only as durable as the preparation that proceeds them. To ensure maximum durability, do not skip the surface preparation.

Professional Grade Glass Ceramic Coating.

Keep out of reach of children.

Shopping Cart

Your cart is currently empty

Shop now